Description

🏠 ATE LC15 Light Grey – Wall Drying System Against Humidity

Electronic wall drying: an innovative and effective solution against humidity

Humidity in walls is often linked to rising damp: water contained in the ground naturally rises through porous materials (brick, stone, mortar), especially in buildings without a damp-proof course. This phenomenon can lead to damp walls, salt deposits, mold, odors, and discomfort.

It is a wall damp-proof device designed to help with the drying of damp walls and the treatment of rising damp, without drilling and without chemical injections. Thanks to its electromagnetic polarity inversion technology, it acts at the source of the issue and supports gradual action over time on moisture in masonry.

⚙️ How does the ATE LC15 work?

Damp walls generate a natural electrical potential difference that promotes the upward movement of water. This device neutralizes this effect by emitting a very low-frequency electromagnetic field, which changes the orientation of water molecules.

Moisture is thus pushed back toward the ground, then removed through natural evaporation, without damaging the wall.

✅ Benefits of the ATE LC15 Light Grey model

💧 Progressive and long-lasting drying of damp walls

⚡ Operating radius: 7.5 m (15 m diameter)

🔇 Silent operation, vibration-free, maintenance-free

♻️ Very low consumption: only 0.75 W (~€15/year)

🔒 Certified safety: no danger to health, animals, or plants

🇫🇷 Product made in France – 10-year manufacturer warranty

📦 Fast and free delivery

ATE LC15 User Manuals

Download the manual in your language:

French – Download the manual

English – Download the manual

German – Download the manual

Italian – Download the manual

Portuguese – Download the manual

Spanish – Download the manual

📦 Technical specifications

Dimensions: 322 x 232 x 32 mm

Power supply: 12 V

Power consumption: 0.75 W

Coverage radius: 7.5 m (max. 15 m diameter)

Certifications:

Low Voltage Directive 2014/35/EU

EMC Directive 2014/30/EU

RoHS Directive 2011/65/EU

WEEE Directive 2012/19/EU

Non-harmful electromagnetic waves (Emitech test)

🛠️ Installation recommendations

Ideal location: at a height of 30 cm to 1 m from the floor, on a damp load-bearing wall (never on plasterboard or dry lining).

Minimum distance: at least 1.50 m from any electrical device.

Installation: wall-mounted (like a frame) and continuous connection.

Area to cover: check that the 15 m diameter properly covers the room or area to be treated.

💡 Tips for an optimal result

Remove film-forming coatings (paint, waterproof render) 10 to 20 cm above damaged areas.

Ventilate the home: install suitable ventilation and ensure sufficient door undercut.

After drying, remove hygroscopic salts from the surface by brushing, then redo the plaster with lime plaster and an anti-salt additive.

Provide drainage if lateral infiltration is present (hydrostatic pressure).

📅 Expected results

By following these recommendations, full wall drying is generally achieved within 18 to 24 months, depending on the structure, building condition, and compliance with the guidelines.

⚠️ Important

This system does not treat active water infiltration, flooding, or mold. These issues must be treated separately to ensure a long-lasting result.