ATE LC15 is a mains-powered Humidistop electromagnetic device offered for identified rising damp. Its stated coverage diameter is 15 metres. Use this figure when examining a plan; floor area alone does not establish suitability.
Who should compare this model?
Compare LC15 for a limited zone. One damp room, a cellar or a small flat does not alone establish suitability. A cellar may have lateral water ingress, while a room may mainly suffer from condensation.
Identify the cause before ordering
Low staining, white deposits and damaged plaster are clues, not confirmation of rising damp. Investigate leaks, rain-related ingress and condensation on cold surfaces. The device does not repair these causes or structural defects.
Read the diameter on a plan
The stated 15 m diameter is neither a 15 m radius nor a guaranteed floor area. Draw affected walls, levels and possible installation points. Check the layout against model documentation. Do not add devices or choose a larger reference without considering the complete configuration.
Prepare mounting and power
Read current instructions for substrate, fixings, location and electrical requirements. There is no universal mounting height for every device. Installation without an injection line may still require fixing holes. Plan access to power and obtain the necessary details before ordering.
Make monitoring meaningful
Keep a baseline with dates, photographs from the same positions, control points and ambient conditions. Salts and materials can affect electrical moisture meters. A displayed reading is not automatically the wall’s water percentage. Where actual water content is needed, have an appropriate method selected. Drying and finish renewal follow no single timetable.
Compare and buy in our shop
The product page provides current specifications and sales conditions. Compare supplied items, instructions and warranty, plus any separate water-source repairs and finish work. Our team can answer model-selection questions using plans and documents; this does not replace investigation of the building.
View the product and current price · Compare all six ATE and ATG models · Prepare installation · Buy in our shop
Does this replace a dehumidifier?
These serve different purposes. A dehumidifier removes water from air. This model is offered for rising damp and does not replace ventilation.
Can I repaint immediately after installation?
Installation alone does not establish readiness. Check the cause, moisture trend, salts and finish requirements before repainting.
Watch the ATE installation video in French
Electrical moisture meter limitations — Buildwise, Belgium (in French)