Article illustration: Resin injection in walls: work, finishes and total budget

Resin injection in walls: work, finishes and total budget

Resin injection in a wall involves repeated interventions on the substrate. Before choosing it for rising damp, examine access, drilling, preparation, application and repairs. The injected product’s price does not describe the whole project. For an owner who wants to preserve finishes, these stages matter.

A line of holes changes the substrate

Requirements vary with the system and wall thickness. SikaMur InjectoCream-100, for example, specifies small, closely spaced holes in a joint. Repeated drilling removes material: even filled holes represent a local change to the substrate. That alone does not establish structural weakening. It does, however, distinguish injection from a device’s local mounting fixings.

Irregular walls need preparation

Access to joints, depth, hole cleaning and continuity of application form part of the manufacturer’s procedure. Irregular masonry may require adaptations, so not every house should be treated as a uniform substrate. The number of holes and quantity of product depend, among other factors, on treatment length and wall thickness.

Injection does not restore damaged plaster

Injection does not reattach peeling paint or reconstruct old plaster. Preparation may require local removal, followed by filling and new finishes. These operations affect appearance during work and have their own cost. Separate treatment, substrate access, protection, cleaning and redecoration before comparing prices. Ask what remains the owner’s responsibility.

ATE and ATG: a different installation

Devices offered by Humidité Conseil for rising damp do not require an injection line or injection product in the wall. The customer installs the selected model using its instructions and the advice supplied. ATE needs electricity; ATG operates without electrical power. Fixings and location follow the actual model instructions. Compare stated coverage and characteristics in our range.

Compare the whole project

The aim is to limit work associated with installing the treatment, without promising that a damaged wall will need no finish repairs. Drying is progressive; wall appearance or a generic date cannot describe every house. Leaks and condensation need action on their causes. Ask for product advice and compare the full cost of the planned operations.

Prepare a useful comparison

Keep a simple list of zone dimensions, proposed model and included work. A device-only price is not a complete renovation price. Read the instructions before installation and ask if the configuration is not covered. This preparation helps select a model and plan finishes without adding services unrelated to your needs.

Compare ATE and ATG in our shop · Explore ATE LC30 · Ask for product advice

Watch the ATE installation video

SikaMur InjectoCream-100 — product instructions, France, November 2025 (French)

Related guides

Compare ATE and ATG devices · Prepare device installation