Want to repaint a wall with blistering paint or persistent marks? Before choosing a finish, investigate the source of the moisture and the actual condition of the substrate. Humidité Conseil offers ATE devices where the identified problem is rising damp. Prepare the whole project, from equipment selection to decorating work.
Identify what needs to be addressed in your wall
Before painting, distinguish the stages: identifying the moisture source, taking appropriate action, monitoring the wall and preparing the substrate. Paint should not be presented as a universal way to treat the source of water. Ask the professional responsible for the finishes to check whether the substrate is compatible with the proposed coating. Surface appearance alone does not establish when it is suitable to repaint.
Explore our devices for rising damp
The ATE electromagnetic range includes LC15, LC30, LC30 PULSE and MAX. Their stated coverage diameters are respectively 15, 30, 30 and 60 metres. Assess these figures alongside the building plan and proposed installation point; they are not habitable floor areas in square metres. Read the product pages to compare the devices and prepare your selection.
An approach without resin injection into the walls
ATE devices are offered to support the progressive drying of walls affected by rising damp, without resin injection. Installation requires mounting and an electrical supply in accordance with the instructions: it must not be described as requiring no power connection. Work on finishes or additional interventions may still be needed depending on the condition of the building.
Prepare installation using the video and instructions
Before installation, check the support, installation point and power connection options. Watch the ATE video to see the steps, then follow your model’s instructions. Keep the invoice, documentation and commissioning date. If the position is uncertain, ask for clarification before fixing the device. This helps prepare the installation and any later discussions about the product.
Plan finishes according to the actual substrate condition
The device does not replace repairing a leak, addressing water ingress or taking appropriate action against condensation. Deal with identified causes and maintain suitable ventilation. Progress depends on the materials and building: do not set a painting date solely because the device has been installed. Document the same areas with photographs and comparable observations, then prepare the finishes when the substrate is suitable.
Explore the products and prepare your order
Move towards a specific selection: compare our models, consult their instructions and read the current terms of sale. Prepare a plan and photographs so you can ask questions relevant to your walls. You can then choose a device with an understanding of its intended use, exact model and the steps required for your project.
Explore the devices and prepare my order · Discover ATE LC30 · Ask for product advice
Watch the ATE installation video
Related guides
Investigate damp at the base of a wall · Plan wall drying monitoring
Technical reference for investigating moisture in traditional buildings: Historic England, RICS and PCA — England, 2022