Rising damp in a second home: choosing an ATE or ATG device for occasional occupation
Explain how the house is used
Rising damp in a second home can coexist with other issues linked to intermittent occupation. Do not attribute every smell or mark to the same cause. Record periods without occupants, ventilation and when changes are noticed. Describe the signs before treating a damp-proofing device as an automatic answer for the entire property.
Distinguish the air from the materials
A dehumidifier or a change in ventilation may address an air condition without demonstrating dry masonry. Where salts and low deterioration are present, prepare questions about rising damp. Leaks and rainwater entry need their own checks and repairs. Several conditions can coexist within one house; a single photograph rarely explains the whole situation.
Check the documented operating requirements
ATE devices require mains electricity; ATG devices operate without an electricity supply. This distinction matters when planning an occasionally occupied property, but does not settle the choice alone. Review instructions, coverage and the building layout. Do not disconnect or alter equipment on the basis of general advice that does not match the installed model’s instructions.
Install the chosen device using its manual
The customer prepares the location and installs the device according to the instructions for the purchased reference. Humidité Conseil supplies product information and installation advice. Keep the manual accessible for any later change to the layout. For ATE equipment, take account of the mains supply required by the model. ATG equipment operates without an electricity supply, while still requiring suitable positioning.
Avoid a universal decorating deadline
The pattern depends on the building, materials and moisture source. Consider the substrate and available observations before repainting or enclosing a finish. An improved surface does not establish that the entire thickness is dry. The next holiday stay cannot serve as a guaranteed completion date for wall drying.
Choose with clear product information
Review the ATE and ATG ranges to compare the specifications and available manuals. The diameter stated for a device should be considered alongside the floor plan and affected walls. Use the English contact page for questions about model selection or installation. This helps prepare an appropriate choice for the intended application.
